Time Lapse



No Haystacks, originally uploaded by jjvornov.

Two days later, I rode past the same field, this time with the Sigma DP1 in my underseat bag on the bike. I stopped in what I recalled was the same spot as on Sunday’s ride, but about 2 hours later in the day.

The haystacks had been brought in. The wider lens on the DP1 renders the scene differently, but the image quality difference is quite striking, especially when view full size on the monitor or as prints.

Maybe on my next ride I’ll drag along the Nikon D80 with the 24mm f/2.8 or 50mm f/1.8 and try yet another rendering.

Summer Base



Haystacks, originally uploaded by jjvornov.

I took this image with my iPhone during my long ride on Sunday. I had brought the Sigma DP1 with me once or twice and the Nikon P5000 once or twice, but I’m generally pretty hard to stop when I’m out riding.

The Geolocation by cell phone tower is quite a bit off, showing the image about a mile south of where it actually was shot (It was near the intersection of Carroll and Glencoe Roads, not off of Papermill Road.). But not bad for the iPhone.

My training season is moving along according to plan. As school let out and vacations started, I’ve been able to put in several higher milage weeks. During the March to June period, I tend to be limited by time, so it made sense to push intensity more and more in an early build. But now that I have more time, I’ve lowered the intensity and upped the time. Once September comes back around, I’ll go back to higher intensity shorter rides as time permits.

Joe Friel in his Cyclist’s Triaining Bible shows an example of a “summer base”. He recently talked about it on his blog:

Joe Friel’s Blog: Summer Base: “I’m doing an organized ride this week – the Bicycle Tour of Colorado. 400+ miles in 6 days and all in the mountains. I’ve noticed several competitive riders and teams doing the tour. A few triathletes, also. What a great way to rebuild base fitness after the first (or second) A-priority race of the season. Lots of climbing to re-establish force and lots of zone 2, aerobic, steady state. Perfect.”

For me, a week of 150 miles in the rolling hills of Baltimore County is a very big week (and almost 12 hours of riding). I feel like these high milage weeks get me to an endurance place that I just can’t achieve with shorter intervals.

For Sale Coal Country



For Sale Coal Country, originally uploaded by jjvornov.

US 209 through south-central Pennsylvania is an interesting ride through a struggling region. Photographically interesting, but intimidating to me to stop and capture. But I guess that Summer is for traveling and my images lately have been further afield than my usual suburban landscapes.

This image was entirely post processed with Capture NX2. The 2.0 version of Capture NX is a very capable program and could serve as my only post processing software when dealing with my Nikon D300 images. Even with the Sigma DP1, after RAW conversion in SPP, I’m favoring post processing in NX2. The only fly in the ointment is that Capture NX doesn’t play well with Aperture, so I’m faced with the separate folder structure containing the edited NEFs and Exported TIFFs. But as long as I leave file names the same, I’m OK with the moving in and out of Aperture.

Sigma DP1 Does Landscape



Green Rock, originally uploaded by jjvornov.

We took a short holiday hike in the central Maryland mountains. Catoctin National Park contains the Presidential retreat, Camp David. It was an overcast, intermittantly drizzly day.

I brought both the Nikon and the DP1, but left the heavy Nikon in the trunk of the car. With the f/4 lens, the DP1 needed ISO 400 for well exposed images along the trail. While it was nice to have a camera in my pocket, I did loose some exposure flexibility. As always, the DP1 image rendering is very special.

D700 Pass for Now



Flag Display, originally uploaded by jjvornov.

I’m really pretty pleased with my decision to commit to the Nikon system last year. The D300 is a great image capture device for me, doing everything I need at this point.

In retrospect, moving up from the D80 to the D300 was a good decision, mostly because I find matrix metering in the D300 to work much better for me than the D80 did. My presumption is that it’s a matter of tuning the system for consumers vs advanced shooters. Using the two cameras with spot metering results in relatively similar images in the end.

What would a D700 do that the D300 doesn’t? Presumably I’d get another stop or stop and a half of sensor speed. But I don’t run into the D300’s limits frequently enough that it would really make a big difference.

There’s the advantage of wide lenses being wide, but I’m fine with the 12-24mm f/4 DX lens providing me with an 18mm equivalent. I’m learning to use my stable of lenses most efficiently- the 24-120mm f3.5-5.6 staying on the camera most frequently, with the 105mm f/2.8 for when I want macro or really sharp images.

This image shows something more- the capture is a first step. The editing and the post processing are so much more central to creating images now. This is another Capture NX2 postprocessing exercise. I set out to make the flags really stand out with local contrast changes. I’m still learning how to best apply curves and u-point adjustments, but it’s easier to achieve in Capture NX2 at this point than in Photoshop.

Fear



Cornfield Storm, originally uploaded by jjvornov.

Why is that I so frequently take the camera out and fear that I will be unable to create a compelling image? You would think that after a while I would know that the odds were pretty good that something would work out.

I wanted to get an image of Baltimore County along one of my cycling routes. I stopped at the end of the day, but approaching storms clouded out the sun and left me without interesting end of day light. But once the sun had gone down, the sky became more interesting being itself lit from within.

This was captured with the D300 and the 12-24mm f/4 DX lens. No tripod. Postprocessing was entirely in Capture NX. There was some noise in the sky, but the noise reduction in NX2 took care of that quite nicely. WIth the U-points, it was easy to keep the smoothing effect of the noise reduction out of the corn stalks where it would otherwise kill the nice sharp detail.

I like the lighting in this. The highlighting of the stalks under the bright sky area doesn’t exist at all in the original capture. It was added using a coloro control point to pull up the highlights which reads very nicely as an eerie lighting of the foreground by the bright sky area. I did it to get the eye to be pulled back into the sky region from the sharp foreground.

Reverse Periodization

The kids are all out of school and I’m in a bit of a lull in the travel schedule. Since I decided to try hard to work my exercise program around my schedule rather than allow my schedule to kill my program consistancy, I had thought about a “summer base” season. I began on the bike in earnest earlier this year, but I didn’t try to build up miles in a typical base. I just went from running and indoor intervals to longer outdoor riding sessions combined with hard interval rides when time was short. I tried to time longer travel weeks to be recovery weeks or I piled up effort at one end of the week knowing the other end of the week would be spent in airports, on planes, recovering from jet lag or photo walks in cities.

I was happy to see Chris Carmichael put together a similar program for Outside Magazine this year. It’s an interval based twelve week program building to a 3 and a half hour long ride, very similar to the idea that I had going into the spring. So much nicer to see some emphasis in these programs on speed in addition to long endurance riding.

Now that the time pressure is eased a bit and the days are long, I’ve upped the hours and dialed down the intensity. Joe Friel mentions it in cycling “training bible” and has written about it on his blog:

Joe Friel’s Blog: Summer Base: “I’d highly recommend it as a way of kicking off the second half of the season. “

June may be the first month where I top 30 hours of training. Hopefully July into August will be similar. I’ll then dial back the hours and up the intensity as fall arrives. It’s something of a reverse priodization where power and intervals are emphasized early on and as time on the bike increase they are used to build endurance.

An Important Image



Considering the Source, originally uploaded by jjvornov.

This is another in the recent Nikon D300 midrange zoom images I’ve been collecting. What’s significant is that I used it as the subject as I began to explore Capture NX2 in earnest.

With the previous version, I thought that the conversions were clearly the best available for the Nikon NEF files. I used the control point technology for overall tonal balancing. But I’d move to Photoshop (via Aperture roundtripping) for local contrast adjustment with curves and then use of the NIK Efex filters plus selective sharpening and blurring.

In the new NX2 any adjustment can be a control point, including curves and sharpening. So instead of using masks in Photoshop, I can use the more direct U-Points of NX2. I’m lacking the handful of Efex filters I favor, but I could purchase them for NX2. That would put almost all of the editing I do directly into NX2.

One point that’s lacking is the ability to directly round trip with Aperture. Now I export the master NEF into a folder, open in NX2, save as TIFF and then drag back into Aperture. If I choose edit with NX2 in Aperture, Aperture first insists on converting to TIFF itself and sending that to Capture NX. It would take a real integration for Aperture to send a NEF, but then for NX2 to send Aperture back a TIFF.

I’m sure I could automate part of this using Applescript and Automator but getting the file back into the project where it belongs seems a bit tricky.

Back to Basics



Magnolia Blossom, originally uploaded by jjvornov.

I feel like I’ve taken a step back in my suburban landscape images. I’m concentrating on capturing smaller objects. It’s the lingering influence of the Alphabet exercise and seeing things through a zoom lens. I’m more actively working to capture the feel of an object rather than responding to a rendered scene before me. It’s easier to do in the summer when the light is less dramatic.

Sigma DP1 Lensmate Announced

Rows
It’s remarkable how many more views my Sigma DP1 images get on Flickr compared to the D300. It’s a camerat that obviously interests a large number of photographers.

The good new today is that Lensmate will be making a 52mm adaptor.

Lensmateonline – Sigma DPI: “The Lensmate DP1 lens adapter has a 52mm filter thread. This size has some advantages over the OEMs 46mm size. The availability and selection of 52mm filters is greater than the 46mm size and many DP1 users already own 52mm filters. The larger size allows the stacking of filters and hoods with less likelihood of vignetting. “

I held off on the official Sigma hood and adaptor hoping for this. I have a set of 52mm filters for my Nikon 24mm and 50mm combo, including my warming filters and polarizaing filters. These will be a nice addition to the travel set. While you’ll often see that standard filters don’t work for digital, I find that comes from a misunderstanding regarding effects on white balance. The filters have the same effect, but our cameras are set to turn everything into unfiltered light. But this kills color light, as in late in the day as well as color filters. I get nice effects by shooting in the middle of the day with a warming filter plus polarizer as we did with film, but then being careful in post processing not to “dewarm” the pciture. You get a nice saturation push and contrast lowering with the filters, just as you did on film.

My last big series with the warming/polarizer combo was last year’s trip to Italy in the Riomaggiore set at Flickr.